adaptorman

small update had to modify the thottle body a bit as it was hitting the bonnet lol

bolted short runner up and checked revs ,,have to say works a treat

nicely missis the alti too ,,

started on some engine wireing ,loom is coupled up ,not tidy as i want to make sure its wired right ,when i set the ecu up


so engines in wireing will be trail sorted, oils in ,steerings sorted ,just need to get some pressure in the feul rail and see what haperns had it cranking over too ,and it have decent oil presure due to it shooting out of the pipe for the turbo feed,,,

adaptorman

couple more but was getting a bit dark .just shows things built up at mo ,,

ill add wideband for the start up and check a few other bits ,and see if i can get a spark/feul and injectors thowing some fuel in the engine,,

adaptorman

small update due to been bisy with other things ,
as i was going to use the v6 vectra coil pack which would have donre the job ,but soon as my boost comes in it would blow the spark out ,so yet again ,had to modify a coilpack with a better ohm output ,then i found the buggar is a lot wider bigger then the other had to make another adaptorplate for it to mount ,so here it is




looks like it was meant to be there ,lol,
just got to pick some ht ends up ,and thats the engine wireing coupled up ,ready for the feul and tank next ,,,somert else ill have to make thing is its were to put it,,think ill have to make one under neath so more steel is needed lol

adaptorman

little update before i attrempt to get it runing ....
coilpack modifyed

its getting a bit tight in there

and may get the header and washer bottle in too ,with a little mod
when the exhaust manifold and downpipe are heat wrapped to save melting things,


seems to be coming together if nothing else lol

oldskoolrod

stop whingeing, plenty of room in there

__________________



BC/DC

Verne

If it gets too tight in there, you'll have to put the engine behind the cab

keep up the good work

__________________
Let there be light, sound, drums, guitar
LET THERE BE ROCK

adaptorman

haha not a problem as if there aint room make rooom ,,well thats wot i say anyway ....

adaptorman

heres a trail engine start with no map sensor,pipe fitted/guessed required fuel settings/no wideband band/loose intake manifold/gussed low inpedance injector settings/runing on redeyes msq
View My Video
View My Video

Ratlook '70

dude that sounds evil.

you should sooooo exit the exhaust out of the bonnet.

__________________
SAS StationWagens

adaptorman

haha be better when ive added the other bits to make it sound and run better